Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Dryer Vent Cleaning Across Atlanta
Dryer vent cleaning in Atlanta typically costs $180-$340 for a standard single-story home with accessible ductwork, and $280-$520 when rerouting or cap replacement is needed. Most appointments are scheduled within a few business days, with our Atlanta office coordinating dispatch for intown neighborhoods and the broader metro area. Call (470) 495-9370 for a written estimate before any work starts.
We’ve been in enough Grant Park crawl spaces and Virginia-Highland attics to know that Atlanta’s older housing stock presents a specific problem: dryer vents installed decades after the original construction, often as improvised flex runs through spaces that were never designed for them. For comprehensive Air Duct Cleaning in Atlanta, our crews address these legacy issues directly. Our crews document what they find with before-and-after photos, quote the full scope in writing, and back every job with the 365-Day Done Right Promise.
Why CleanRun Air Duct Cleaning Atlanta Is Atlanta’s Preferred Dryer Vent Cleaning Company
CleanRun has served Atlanta-area homeowners since 2013, completing more than 52,000 jobs with a written price delivered before work began on every single one. That record matters in a market saturated with $79 coupon offers that balloon once the technician is inside.
Our Atlanta customers receive a Documented Photo Record on every visit - the inside of every vent run photographed before and after, delivered as part of the standard job record. You see what was there and what was removed. No ambiguity.
All technicians are background-checked, uniformed, and identified by name before arrival under Haven Standard Clause 3: Verified Crews. Equipment on Atlanta jobs includes Rotobrush, Nikro, and Abatement Technologies systems - brands you can look up and verify independently.
Scheduling and dispatch are coordinated from our Atlanta office, so we’re not routing crews from outside the metro or guessing at intown traffic patterns. We know the difference between a Decatur bungalow crawl space and a Cobb County ranch slab.
Our Dryer Vent Cleaning Services in Atlanta

Dryer Vent Inspection
Every Atlanta job starts with a camera inspection of the full vent run, from the dryer connection to the exterior cap. In neighborhoods like Candler Park and Virginia-Highland, we’re often looking at retrofitted flex duct from the 1970s or 1980s that has sagged, kinked, or been crushed by other trades over the decades. The camera shows us where lint has packed solid, where seams have separated, and whether the run meets the dryer’s manufacturer airflow spec. We deliver the footage and a written scope before any cleaning or repair work begins.

Vent Cleaning and Lint Removal
Our Dryer Vent Cleaning crews use negative-pressure extraction with HEPA filtration to remove lint deposits without blowing debris into the laundry space or attic. Standard brush passes work for straight, intact runs. But Atlanta’s humid crawl spaces and 130-140°F attic temperatures create a different problem: lint that has absorbed enough moisture to mat and harden, or that has bonded with degraded duct tape at a failed seam. When the camera shows packed lint that mechanical brushing alone won’t clear, we say so in the written scope and explain what additional work is needed.

Vent Rerouting
This is the service we find ourselves recommending most often in Atlanta’s intown bungalows. The original 4-inch metal run was frequently extended with flexible duct through a crawl space or attic chase - runs with too many elbows, too much sag, and too little airflow. Lint settles in the low spots. Humidity keeps it there. No amount of cleaning fixes a run that was fundamentally poorly routed.
On a 1948 Craftsman bungalow in Grant Park, we ran a camera inspection from the vent cap back to the dryer and found the original 4-inch metal run had been spliced into a length of sagged flex duct in the crawl space, packed solid with lint and holding a bird nest against a broken cap. We cut out the collapsed section, rerouted with rigid metal and a new vent cap plus bird guard, then cleared the remaining lint pathway under negative pressure with HEPA filtration. The homeowner’s dryer cycle time dropped from two loads to one, and airflow at the termination read back at spec.
Rerouting in Atlanta typically runs $340-$620 depending on access, length, and whether we’re working in a crawl space or finished attic. We quote the full price in writing before cutting anything.

Bird Guard Installation and Vent Cap Replacement
Atlanta’s tree canopy - the same one that drives those notorious pollen counts - also means birds, squirrels, and nesting material in vent terminations. A broken or missing cap is an open invitation. We stock replacement caps and bird guards for standard 4-inch terminations and can install them during the same visit as the cleaning or rerouting. The hardware is photographed in place and included in the job documentation.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Atlanta
Our Atlanta crews run professional-grade equipment from Nikro, Abatement Technologies, and Honeywell - brands recognized across the HVAC trade for negative-pressure extraction, HEPA containment, and airflow verification. We also provide Atlanta Carrier service with the same professional standards. We don’t use shop vacs with brush kits from the hardware store. Parts for vent caps, bird guards, and rigid metal transitions are stocked locally, so most Atlanta jobs are completed in a single visit without waiting on supply-house orders. If your system uses Aprilaire or Guardsman accessories, we carry compatible hardware and document what was installed in your job record.
Common Dryer Vent Cleaning Problems We See in Atlanta Homes

- Collapsed flex duct in humid crawl spaces. Decades-old flex duct retrofitted through humid Atlanta crawl spaces sags and kinks, creating low spots where lint and moisture pool and a brush pass alone can’t clear it. We find this routinely in Grant Park and East Atlanta bungalows where the original laundry setup was moved to a basement or rear addition.
- Baked seams in attic terminations. Vent runs terminating in 130-140°F attics bake the flex duct’s foil and tape until seams separate, letting humid attic air and blown insulation into the lint pathway. The camera shows insulation fibers mixed with lint - a clear sign the duct envelope has failed.
- Multi-elbow runs below manufacturer airflow spec. Long, multi-elbow runs common to retrofitted bungalow layouts keep airflow below the dryer manufacturer’s spec, so lint settles out even when the homeowner cleans the trap religiously. The fix is usually rerouting to reduce elbows, not just cleaning what’s there.
- Missing or broken caps with nesting debris. Atlanta’s mature canopy attracts birds and squirrels to rooflines and soffits. A missing cap means nesting material, sometimes a full blockage, and occasionally moisture intrusion that degrades the duct from the outside in.
Pricing for Dryer Vent Cleaning in Atlanta, GA
A standard dryer vent cleaning in Atlanta - single-story home, accessible termination, intact rigid or flex run - runs $180-$280. When the camera shows packed lint in a sagging flex section, collapsed duct, or failed seams, vent rerouting with new rigid metal and a replacement cap typically falls in the $340-$520 range. Complex reroutes through finished spaces or multi-story runs in Virginia-Highland or Decatur Victorians can reach $480-$620.
| Service | Typical Range (Atlanta) |
|---|---|
| Standard vent cleaning, accessible run | $180-$280 |
| Cleaning + vent cap replacement | $240-$360 |
| Vent rerouting with rigid metal (crawl/attic) | $340-$520 |
| Complex reroute, multi-story or finished space | $480-$620 |
| Bird guard installation (same visit) | $85-$140 |
Every price is written and agreed before work starts - Haven Standard Clause 1. No per-vent pricing, no add-ons after the fact. Bring a competitor’s written estimate and we’ll provide a Free Second Opinion, our number next to theirs.
Call (470) 495-9370 for a free estimate.
We Also Serve Cities Near Atlanta

Our crews work throughout the metro area, including Dryer Vent Cleaning in Atlanta proper and neighboring communities: Smyrna, Mableton, Marietta, and Decatur. Scheduling is coordinated from our Atlanta office, so response times and crew availability remain consistent across these service areas.
Serving Atlanta, GA - Our Local Coverage Area
We’re based in the Atlanta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Dryer Vent Cleaning in Atlanta

The retrofitted flex duct in 1920s-1950s intown homes was often routed through humid crawl spaces with too many elbows and insufficient slope, so lint settles in low spots that a standard brush pass can’t reach. Newer suburban homes typically have shorter, straighter runs designed with the original construction. If your dryer cycle times are creeping up, call (470) 495-9370 and we’ll camera the run to show you exactly what’s happening inside.
You’ll know because the camera inspection shows collapsed, sagging, or multi-elbow flex duct that falls below the dryer manufacturer’s airflow specification - usually under 1,500 FPM at the termination. When airflow is insufficient, lint will reaccumulate within months of cleaning. We quote both options in writing when this is the case, so you can see the cost difference between a temporary clean and a permanent fix.
Yes. Atlanta’s sustained humidity above 60% through most of the year keeps lint moist and adhesive in crawl spaces, while 130-140°F attic temperatures degrade foil tape and flexible duct insulation until seams separate. We’ve pulled apart attic terminations where the tape has turned to powder and the flex duct is held together by lint alone. Rigid metal with sealed joints and a proper cap is the only material that holds up long-term in these conditions.
Yes. We stock standard 4-inch caps and bird guards on every Atlanta truck and can install either during the same appointment. The hardware, installation, and final photo are included in the written scope agreed before work starts. No second visit or separate charge.
For a typical Atlanta household doing 4-6 loads weekly, every 12-18 months is a reasonable interval. Homes with intown retrofitted runs, multiple residents, or pets that shed heavily should plan for annual inspection - the camera will tell you whether cleaning or rerouting is actually needed. Call (470) 495-9370 to schedule.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Atlanta since 2013.




Before
After
Before
After